 |
Product Features |
 |
Fiber Laser Marking is very compact, plug-n-play type of system. |
|
Fiber Laser Marking runs on single phase electrical connection, so very less electricity consumption. |
|
Fiber Laser Marking System does not require laser & optics alignment, which leads to lesser maintenance cost. |
|
Fiber Laser Marking System has no consumables like lamp, flow tube, DI filter, diode, etc. So, very less operating cost. |
|
Fiber Laser Marking does not require external bulky chiller, only room AC is good enough.
|
|
| |
| |
 |
| |
|
Technical Specification |
|
| |
 |
| Laser Type |
Fiber Laser |
| Pumping Method |
Multi-diode Pumped |
| Average /CW Output Power |
20 W |
| Wavelength |
1062 ± 3 nm |
| Beam Quality |
M2 < 2 |
| Pulse Width |
< 80 ns |
| Pulse Repetition Rate /Frequency |
1-100 kHz |
| Peak Power |
12 kW |
| Red Aiming Beam / Guide Laser |
Yes |
| Laser Class |
IV |
| Ambient Temperature |
25 °C |
| Electrical Connection |
230 V / 50 Hz ; Single Phase: 115 V/ 60 Hz |
| Power Consumption |
< 1 kW |
| Marking Area |
100 x 100 mm |
| Working Area |
400 x 250 mm |
| Z-Axis Travel / Max. Work Piece Height |
100 mm |
| Z-Axis Motion Type |
Motorized / Manual |
| Software Features |
- Window 2007 / XP Compatible
-
Single Screen Highly User Friendly Graphic User Interface(GUI)
- *.plt, *.jpeg, *.bmp, *.dxf compatible
-
Serial Number, Barcode, 2D Matrix Code Marking
-
Auto Marking Activation with delay according to work study
-
Multiple Object Preview/ Single Object Preview
-
RS 232 / Automation Compatible |
| |
|
|
 |
 |
 |
|
|
